Reset back factory bios after updating ireland spiritial dating
The exact menu option in your particular motherboard's BIOS may differ but look for phrases like , etc.Every manufacturer seems to have their own way of wording it.Finally, remove the CMOS battery for a few minutes and then put it back in.Close the case or battery panel and then plug in, or reattach the computer's main battery.By disconnecting and then reconnecting the CMOS battery, you remove the source of power that saves your computer's BIOS settings, resetting them to default.Laptops & Tablets: The CMOS battery shown here is wrapped inside a special enclosure and connects to the motherboard via the 2-pin white connector.
Note: The directions I linked to in the heading above detail how to access your BIOS utility but do not specifically demonstrate how to clear the CMOS in your BIOS utility.
You might also want to clear CMOS to reset a BIOS or system-level password, or if you've been making changes to BIOS that you suspect have now caused some kind of problem. Any one method is as good as any other but you may find one of them easier, or whatever problem you might be having may restrict you to clearing the CMOS in a particular way.
Important: After clearing the CMOS you may need to access the BIOS setup utility and reconfigure some of your hardware settings.
Any confusion here can be cleared up by checking the CMOS clearing steps outlined in your computer or motherboard manual.
Turn back on the computer and make sure that the BIOS settings have reset, or the system password is now cleared... If everything is good, turn off your computer, return the jumper to its original position, and then turn the computer back on.
The battery will be a small coin-shaped cell and may be snapped or clipped into a socket.